Filter By:

  • Show More Brands

  • Show Fewer Brands

Stems

Whisky Parts Co. No. 7 Stem
$40.00
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.
TruVativ Holzfeller Stem
$64.00 - $66.00
Whether you’re trying to hold your line on a jackhammer descent or stick a landing on a 20-foot gap jump, you need confidence and control. The heart of the beefy HOLZFELLER Stem is its 6066 aluminum body, 3D forged into a thing of beauty with all-new graphics. It takes design cues from the lighter AKA Stem, but has added strength for the most extreme DH and Freeride situations. The HOLZFELLER features a 2-bolt steerer clamp and 4-bolt handlebar clamp and weighs less than 200g (190g for a 40mm length). It’s available in two color choices and three lengths: 40mm, 55mm or 60mm. HOLZFELLER Stem is also available with a larger 1.5-inch steerer tube diameter.
Ritchey WCS C220 Stem
$89.95
The WCS C220 stem is easy to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. - The handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar - Bolt forces are aligned with the clamp so that the stem body embraces the handlebar which is less prone to damaging lightweight bars - Clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness
FSA Energy Stem
$98.99
At just 113g for a 100mm extension, the Energy stem represents cutting-edge aluminum construction. The shape is 3D forged from 2014-aluminum for great strength, with the final refinements carried out by CNC machining. Chromoly bolts complete the package.
Dimension Trail Stem 31.8
$30.00
For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
Zipp Service Course Stem
$56.00
Zipp's Service Course Stem is strong, light, and reliable. Forged of 7075 aluminum with stainless steel bolts, the Service Course is stiff enough to harness the power of your burliest sprints and withstand the jarring forces of the meanest potholes. It keeps the front end completely rigid, providing control no matter the condition.
Zipp SL Sprint Stem
$265.00
Just as cyclists maximize performance by being as light, but as powerful as possible, Zipp's SL Sprint Stem strikes the ideal balance of stiffness and lightweight to deliver responsive handling without wasting a single watt. - Unidirectional carbon - The SL Sprint comes with its own stem cap that’s designed to be aerodynamically efficient by blending into the stem body - Includes stiff aluminum faceplate and stainless steel hardware with TORX heads on all bolts for precision torque readings and ease of adjustment - Black matte carbon finish with white Zipp logos
Spank Oozy Trail Stem
$75.00
All Mountain strength and stiffness...trail tuned! Spank Industries' OOZY Trail Stem offers all the performance and confidence of a gravity stem, in a highly weight-sensitive, trail-tuned geometry package. 3D-forged and CNC weight-optimized, the OOZY Trail stem comes in popular lengths, with an ultra-short stack height and true zero degree rise. Chamfered barclamps reduce stress risers in the critical bar/stem interface, and ultra-light spacer and sealed top-cap (included), make set-up a breeze. The OOZY Trail Stem's characteristic hourglass sectional profile and wide stance enhance torsional stiffness and integrates beautifully with modern frame designs. Weight, performance, aesthetics and great value...the OOZY Trail Stem has it all. - Key technologies: MGR, chamfered bar clamp, "Snap Fit" sealed top cap - Material: 3D Forged MGR Alloy, CNC Weight Optimized - Length (mm): 50 / 65 / 75 - Rise (mm): 0 - Diameter (mm): 31.8 - Stack height (mm): 35 - Weight (g): +-150 (50mm) / +-170 (65mm) / +-180 (75mm) - Finish: Shot Peen anodized, CNC/Laser etched logos
Dimension Trail Stem 35.0
$35.00
For cross country and all-mountain riding, Dimension Trail Stems provide a broad array of sizing options, rigorously tested to ISO 4210 Mountain standards. - Constructed with AL-6061-T6 aluminum - Shot-peened finish - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes
Ritchey WCS Carbon Solostreem Handlebar/Stem
$499.95
A new breed of champion is born. The WCS Carbon Solostreem features a classic bend, UCI-compliant aero top section with short/shallow classic drop, integrated mount ready for K-Edge or similar devices, and underside grooved cable routing for a sleek appearance. It enjoys a matte UD carbon finish and its curved stem clamp greatly reduces steerer stress. - Material: Carbon monocoque with forged alloy steerer clamp - Stem Angle: 84 -degree - Drop/Reach: 126/75mm(Measured center-to-center where the levers mount) - Sweep/Flare: 4.7/1-degree - Features mounting holes for computer/accessory mount - Matte UD carbon finish - Weight: 350g (42cm x 100mm)
Profile Design Aris OS Road Stem (+/-25-degree rise)
$47.49
Profile's Aris OS stem is a no-nonsense stem made from 6061-aluminum that's been shot peened and anodized for strength and durability. The 4-bolt faceplate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.
Fizik Cyrano R1 Stem
$120.00
Stems need to be light, simple, and rock solid. Fizik checked all the boxes with their Cyrano R1 Stem. The Cyrano stem forms an integral part of Fizik's Spine Concept fitting technology. A four-bolt face plate provides excellent torsional stiffness, and the choice of lengths and angles ensures that your perfect fit is out there.
Zipp Service Course SL Stem
$112.00
Zipp's Service Course SL Stem provides strength and reliability at just 120 grams. Forged of 7075 aluminum with titanium bolts, the SL is stiff enough to harness the power of your burliest sprints and withstand the jarring forces of the meanest potholes. It keeps the front end completely rigid, providing control no matter the condition.
Zipp SL Speed Stem
$265.00
Zipp’s SL Speed stem represents the essence of carbon componentry. It’s stiff, secure, and lightweight with a sleek design that complements any bike. It’s a perfect addition to a mountain climber’s favorite feather-light road bike, but it’s tough enough to tackle gravel and cyclocross. - Includes stiff aluminum faceplate and titanium hardware - Torx T25 heads for precise torque readings and ease of adjustment - Stack height: 41mm
Ritchey WCS Carbon Matrix C220 84D Stem
$159.95
You really can have it all-the new WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove, thanks to a press-fit handlebar clamp interface and forward-facing hardware. First proven on the Ritchey TRAIL stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220-degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The Carbon Matrix stem body is forged 7075 aluminum with a stiffness-enhancing carbon exoskeleton which makes this 12% stiffer than the WCS alloy C220 stem. Premium quality CRMO steel bolts are used throughout. - Material: 3D forged 7075, carbon encased body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Stack: 42mm - Steerer: 1-1/8" - Faceplate Width: 42mm - Matte UD carbon finish - 126g (110mm)
TruVativ Descendant 35mm Stem
$65.00
Mix and Match might work for clothing, but not your mountain bike cockpit. The new Descendant stem is 3D forged from 7075 alloy, then machined for weight reduction, and is the perfect match for your Descendant bars. Built strong, to take on the world’s toughest trails, Descendant stems keep you pointed in the right direction. - Perfect match with Descendant handlebars - 3D forged 7075 - CNC machined for weight reduction - Four bolt handlebar clamp - Two bolt steerer clamp
Profile Design 1/ZeroSeven
$54.99 - $57.99
Simple, elegant, lightweight design can be run in negative or positive position for -7°/ 7° in rise. 3D forged 6061-T6 aluminum combined with a 4-bolt faceplate provides increased stiffness. - Weight: 167g (100mm) - Length: 70, 80, 90, 100, 110, 120, 130mm (±7°) - Material: 3-D Forged 6061-T6 Aluminum - Clamp Diameter: 31.8mm - Angle: 83° (±7°) - Steerer Tube Diameter: 11/8in - Stack Height: 40mm - Clamp Width: 40mm - Clamp Tourque: 5Nm
Race Face Atlas 35 Stem
$99.99
RaceFace designed their Atlas 35 stem to reduce overall system weight while retaining the proven stiffness and performance the Atlas line is known for. The stem itself is measurably stiffer than the 31.8mm offering and, although the system is a seemingly burlier build, the weight savings gained by the reduction in bar material actually makes the 35 system lighter overall. An impressively light, strong addition to your aggressive trail or DH/FR build. - Four-bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry - Faceplate eliminates stress risers which cause your bar to bend or break - Opposing bolts on steer tube clamp provides extreme clamping power while reducing stress on the steer tube - Stack Height: 40mm
Race Face Atlas Stem
$99.99
The RaceFace Atlas is designed to bridge the needs of AM and FR/DH riders: light enough for AM, tough enough for FR and DH, providing the ultimate in versatility. - Four bolt bar clamp holds bar securely in position - Interlocking U-Shaped Handlebar Clamp Geometry - Faceplate eliminates stress risers which cause your bar to bend or break - Opposing bolts on steer tube clamp provides extreme clamping power while reducing stress on the steer tube - Stack Height: 40mm
Parlee Cycles Stem
$325.00
Parlee’s carbon stem is a masterpiece of strength, beauty and performance. It utilizes a 35mm bar clamp diameter that offers sharp steering precision while the two-part face plate is forged for longevity. Titanium bolts are mated to replaceable aluminum inserts throughout, protecting your investment from cross threading and other mechanical damage. - Weight: 125g
Race Face Turbine R 35 Stem
$104.99
Race Face took their super popular Turbine 35mm stem and turned the volume up to R. Increased strength to handle the harshest aggressive all mountain riding combined with an update to 0-degree size for optimized fit and performance. This stem sets the new standard in weight vs strength. - CNC Aluminum - 0-degree rise for perfect fit on aggressive bike frames - Extensive CNC machining for weight reduction without impacting strength - TopLock faceplate design for easy and secure installation
Race Face Aeffect R 35 Stem
$59.99
Built for all-mountain riding, the new Aeffect Rally 35 stem is a no nonsense workhorse. With increased strength and shorter length options available for modern bike geometry, Aeffect R performs well above its price point…and all of this at a competitive weight.
Easton EA70 Stem
$64.99
Whether you're on the open roads or scenic mountain trails or anywhere else you ride, Easton's EA70 Stem enhances your cycling experience. It's made of 3D forged aluminum for amazing stiffness, low weight and strength for excellent steering control in all conditions. Plus, Easton's TopLock technology locks the stem and faceplate together, creating a highly rigid interface while minimizing loads on the bolts, making the EA70 perfectly safe for carbon bars.
3T Apto Pro
$70.00
For 56 years, 3T products have offered a combination of Italian elegance and performance. The Apto once again combines both with a beautiful shape and a lightweight, stiff and strong structure. The reversed bolts clean up the faceplate, while their wide spacing increases the connection to the handlebars. Its double steerer bolts securely hold the stem in place.
Ritchey WCS C220 84D Stem
$89.95
You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 84D Stem offers 6-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Faceplate Width: 42mm - Blatte finish - 121g (110mm)
Ritchey Superlogic C260 84D Stem
$269.95
Ritchey's first full-carbon stem was designed to meet the needs of high-wattage European Classics specialists. The Carbon C260 adds to the amazing strength-to-weight ratio of our C260 alloy and Carbon Matrix stems through the use of high modulus carbon fiber, increased boom diameter, and a wider clamp. Gram-for-gram, this is the lightest, stiffest full carbon stem on the market, making it the most advanced Ritchey stem ever. - C260 bar clamp creates a larger stem-to-bar interface, drastically reducing bolt stress - 4 x T-20 faceplate bolts and patented 260-degree bar clamp design reduces weight, increases stiffness, and distributes stress more evenly - 3 x T-20 steer tube bolts and curved clamp slot reduces weight and steer tube stress - Fits most road and mountain bars - Material: Carbon with 2014 alloy faceplate - Length: 90mm - Angle: 84/6 degree - Stack: 42mm - Faceplate width: 42mm - Steerer: 1-1/8" - 125g (110mm)
Spank Spoon 2 Stem
$39.90
- Unique style, modern geometry, and rock solid construction, without the heavy price tag - Suitable for all disciplines: Freeride, All Mountain, Enduro - Chamfered bar-clamps to reduce stress risers and increase fatigue life in handlebars - Ideal for shorter riders to improve the setup of their cockpit. - Length (mm): 40 - Rise: 0° - Diameter (mm): 31.8 - Stack height (mm): 35 - Weight (g): ±170 - Finish: Shot peen anodized, laser logos
Spank Spank Split 35 Stem
$89.90
- Highly weight optimized single crown stem, ideal for Enduro applications with 31.8mm handlebars - Human Factor Design features micro increment size options, tuned to fit any rider size and style - Human Factor cockpit setup index facilitates tuning of upsweep and backsweep - Ultra-short stack height and true zero degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Forged 2-piece faceplate design reduces overall weight without compromising bar clamp security or stiffness - Shot peen-anodized surface increases strength, durability, and fatigue life
Specialized Comp Multi Stem (12-degree)
$49.99
Thanks to an ingenious system of shims you slip over your fork, Specialized's Comp Multi Stem is adjustable in 2-degree increments from +/- 8 degrees to +/- 16 degrees for a perfect fit on your road or mountain bike and optimum ergonomics. It's forged and CNC'd from 6061 aluminum for excellent lightness and strength. Plus, it boasts a 4-bolt clamp that's compatible with carbon and aluminum handlebars.
3T Apto Team
$100.00
For 56 years, 3T products have offered a combination of Italian elegance and performance. The Apto once again combines both with a beautiful shape and a lightweight, stiff and strong structure. The reversed bolts clean up the faceplate, while their wide spacing increases the connection to the handlebars. Its double steerer bolts (Titanium in case of the TEAM version) securely hold the stem in place.
Page 1 of 4 Next page