Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Fenders

SKS X-Blade 27.5+/29-inch
$37.99
The X-Blade 27.5+/29-inch is a high-quality 2-component clip-on fender for the rear wheel of a 27.5+/29-inch mountain and trekking bikes. Due to the quick-release mounting, the fender can be fitted to almost any seat post and optimally adjusted to the wheel using the 2-joint technology. - High performance dual compound plastic - Easy quick-release-fastening by pre-adjusted powerstrap - 2 joints for optimized adjustment to all frames - Optimized dirt protection - 27.5+ and 29-inch wheel compatible
SKS X-Tra Dry
$29.99
No matter the conditions, stay dry and clean with SKS's X-Tra Dry rear fender! It's super light and nearly unbreakable so you know it's ready for the miles, on road and off. Plus, it works with most bikes thanks to its easy-to-adjust seatpost mounting strap.
Problem Solvers Fender Flute
$20.00
The Fender Flute fits inside most forks and attaches to standard front fender tabs for mounting fenders closer to the wheel. - Especially helpful for fender mounting on suspension-corrected forks - Threaded M6 holes at 10mm intervals for fine-tuning fit - Bolts and lock washers included
SKS Shockblade 27.5+/29-inch
$37.99
The Shockblade 27.5+/29-inch is a clip-on front, high-quality 2-component fender for mounting on the fork of 27.5+ and 29-inch mountain and trekking bikes. - Virtually unbreakable high quality dual compound plastic - Hidden chuck cone adapter which is fitted once during first assembly - Easy quick-release fastening - Optimized dirt protection - Fits almost all suspension forks - 27.5+ and 29-inch wheel compatible
Planet Bike Big Buck Fender
$34.99
Front Fender: • Front fender made of durable all-weather polymer • Mounts to most suspension and rigid forks • Fits oversized tapered steer tubes along with small and standard sizes. (18.5-34.5mm ID) • Extra-wide profile for 3-5" wide tires Rear Fender: • Minimalist seat post fender made of durable all-weather polymer material • Quick-release mount snaps on and off in seconds • Wide profile design • Features an adjustable fender angle to fit most bikes • Extra wide profile to fit 3-5" tires
Specialized Roll Fender Set
$59.99
Keep the road grime and water off your clothes with a durable fender set made specifically for the Roll. No-fuss installation means you can add them quickly and easily, so you're always ready to ride. - Valuable and durable plastic fender set for Roll. - Designed for 650b x 2.3" tires. - Stainless steel fender stays and hardware. - Rear fender supports Plug and Play frame mounting. - Front: 660mm / Rear: 1050mm
PDW Origami Clip-On Front Fender
$16.00
Just the thing for rainy weather, the Portland Design Works minimalist Origami Front Fender attaches to a snap-on/off bracket you mount on your downtube. And it folds flat so you can easily stow it when not in use. - Length: 370mm (14.5") - Weight: 60g (2.1oz)
Planet Bike Hardcore Fenders (Road)
$59.99
Turn your bike into an all-weather vehicle with Planet Bike's Hardcore Fenders. Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. They boast mudflaps for the ultimate in splash and spray protection and the front fender has release tabs for easy on/off. Plus, the hardware is pre-installed for quick mounting.
Giant Speedshield RGX 38 Fender
$57.75
- Safety release clips detach passively when an object becomes lodged - Length-adjustable struts and strut slots for perfect positioning and tire clearance - Designed for use on disc brake bikes with thru-axles - Compatible Giant Bike Model: Defy / Defy Adv/ Avail Adv / Contend AR/ Contend SL - Compatible Wheel Size: 38 version: 700*32c (Tire width: <320mm), 45 version: 700*32c~700*42c (Tire width: 320mm~420mm)
Giant Speedshield RGX 45 Fender
$57.75
- Safety release clips detach passively when an object becomes lodged - Length-adjustable struts and strut slots for perfect positioning and tire clearance - Designed for use on disc brake bikes with thru-axles - Compatible Giant Bike Model: Defy / Defy Adv/ Avail Adv / Contend AR/ Contend SL - Compatible Wheel Size: 38 version: 700*32c (Tire width: <320mm), 45 version: 700*32c~700*42c (Tire width: 320mm~420mm)
Giant Speedshield Defy/Avail Aluxx Fender
$50.00
- Designed for compatibility with the Giant Defy Aluxx and Liv Avail Aluxx bikes - Quickly adjust gap between fender and tire - Tool-Free universal mounting system - Full coverage protection
Muc-Off Ride Guard Rear Fender
$11.99
- Guards against mud - Made from 100% recycled plastic waste - 100% recyclable - Supplied with 4 zip ties - Made in England
Topeak D-Flash DT Fender
$15.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 35cm / 13.8" (in length) - Weight: 68g / 2.40oz
Planet Bike Clip-On Fenders (ATB)
$24.99
You only need a couple of seconds to protect yourself and your bike from wet weather. Planet Bike's Clip-On Fenders are made of a durable all-weather polymer so never again will you come back from a ride with a dirt streak up your back. And, because they're clip-ons, you can easily remove the fenders when it's dry.
Planet Bike Hardcore Fender Hardware Kit
$4.99
The Hardcore Fender Hardware Kits are compatible with select Hardcore fenders, Full Fenders, Hardcore Recumbent Fenders, and SpeedEZ fenders. Includes: - Rear fender plastic clip - Fork and brake bridge-thru bolts - Stay bolts and lock washers Specific compatibility w/Planet Bike fenders: - 35mm Width: 700c x 35mm Fenders (Hardcore) - 45mm Width: 700c x 45mm (Hardcore, Full, and SpeedEZ); 700c Rear (Hardcore Recumbent) - 60mm Width: 26-inch x 60mm (Full, SpeedEZ, and Hardcore)
SKS Dashblade Rear
$24.99
Keep water and mud at bay with SKS's Dashblade fender! It's light and easy to install and remove thanks to its quick-release strap that fits a wide variety of seatposts and seat tubes.
SKS Shockboard
$30.99
Keep water and mud off you with SKS's Shockboard front fender! It's super light and nearly unbreakable so you know it's ready for off-road action. Plus, it works with most rigid and suspension forks as well as disc and linear-pull brakes.
RockShox RockShox MTB Fender
$16.00 - $21.00
Optimized for RockShox forks, RockShox MTB Fenders deliver exceptional protection for your fork, with deep side skirts to keep the mud and debris away from the most vital parts of your fork—and your body. Take your bike's customization to the next level with nine color offerings made to match RockShox decal packs—or go black-on-black for that minimalist look. MTB Fenders come complete with four beefy zip ties for installation so you can get to the trailhead sooner and shred with much less mess. - Works on all RockShox fork models - Comes with 4 zip ties for immediate installation - Offered in a wide range of colors that match RockShox's fork decal packs - Designed specifically for RockShox forks - Deep side skirts protect stanchions and dust seals from rocks and debris - Precisely placed mounting holes make the fender follow the wheel's contour, minimizing contact when the fork is compressed
PDW Sodapop Clip-On Fenders
$21.00
Portland Design Works' neat Sodapop Fenders are made from 97% post-consumer recycled bottles. They pop on and off with ease, keep you dry in the rain, and get one back for the planet, too! - City width: 48 mm at tail - Mountain width: 64 mm at tail
Planet Bike Grunge Rear Bike Fender
$29.99
The Grunge Rear seat post mounted fender is designed with an 85mm wide profile to shield your rear end from spray, mud and crud. It'll keep you clean on your commute or when ripping around on singletrack. - Durable all-weather polypropylene blade - Quick release seatpost mount attaches and removes in a snap - Features fender angle adjustability to fit most bikes and dial in spray protection - Eyelets Required?: No - Wheel size: 24", 26", 650b, 29" and 700c - Fender width: 85mm wide x 460mm long - Max tire width: 2.25" - Weight: 174 grams
Planet Bike Cascadia ALX Fenders
$89.99 - $119.99
- Rugged 6061 aluminum construction is corrosion resistant - 100mm mudflaps provide ultimate coverage and are double-riveted for durability - Hardware is all stainless-steel and pre-installed for hassle-free mounting - V-stays for added stability - Disc brake compatible - 50mm width - Release Tabs on front fender for added safety - Meets EN test standards
Topeak D-Flash S Fender
$14.95
This flat-printed, origami-inspired polypropylene fender is ultralight, stylish, and quickly attaches and is ready to go when wet weather arrives. Simply remove from the package, punch out the shape and fold along the perforated lines. Reflective printing adds safety at night while multi-mount positions and hook-and-loop straps allows fender to fit a wide range of bikes. - Material: Polypropylene - Added Features: 3M reflective printing - Size: 31.7cm / 12.5" (in length) - Weight: 42g / 1.48oz
Planet Bike Cascadia ALX 20-inch Recumbent Bike Fender
$49.99
If you ride bent, Planet Bike's recumbent fenders keep you covered when Mother Nature rains on your ride. They are designed for non-tradtional bike and trike setups. Their clean lines and rugged aluminum construction provide great protection from rain, road grit, and other tire spray. - 6061 aluminum blades - Stainless steel V-stays and hardware are pre-installed and disc brake compatible - 100mm mudflaps for extended coverage - Release Tabs on front fender for added safety - Eyelets Required?: Yes - Wheel size: 20” - Max tire size: 20" x 1.5" (50mm) / 20" x 1.9" (60mm)
SKS VeloFlexx 55 Quickrelease Fender Set
$68.99
The VELOFLEXX mudguard set combines the stability of a fixed mudguard with the flexibility of a clip-on mudguard. The VELOFLEXX bridge allows the rear mudguard to be attached at the top of the seat stay with the use of rubber straps—no tools needed. This method of mounting doesn't rely on the cross stay where the caliper brake is usually bolted. At the front, the VELOFLEXX is mounted to the fork bridge with a rubberized hook-and-loop fastener or a cable tie. The black-coated stays provide even greater support. - Compatible only with disc brakes - Includes hook-and-loop fasteners and tension rubber - Weight: 580g - Max. outer diameter: 35mm - Wheel size: 27.5" (650B), 28" - Tire width: 52mm - Length, front fender: 680mm - Length, rear fender: 870mm
PDW Mud Shovel 6.5 Fork Mount Fat Fender
$15.00
These clip-on fenders are designed specifically for fat bikes. They're extra long and wide to block the muck, snow, or sand you'll ride through on your next fat bike adventure. - Extra-long and wide to accommodate the biggest tires - Easy to install and fits virtually any bicycle - Works with both rigid and suspension forks
Planet Bike Full Fenders (ATB)
$49.99
Turn your bike into an all-weather vehicle with Planet Bike's Full Fenders! Made of unbreakable Superflex polycarbonate with stainless-steel stays, they're ultra tough. Plus, the hardware is pre-installed for hassle-free mounting.
PDW Full Metal 700C Fenders
$129.00
PDW's Full Metal Road Fenders are designed to fit road bikes that are difficult to install full-coverage fenders on. They have special hardware to get around caliper brakes and under forks, even add-on mounts for bikes that lack eyelets to mount fender stays to. They provide full-wrap coverage, even shielding riders behind you from tire spray thanks to the sturdy rubber mudflaps. Plus, safety release tabs ensure your wheels keep turning, even if debris gets lodged between the fender and tire. - Anodized aluminum - 30mm wide - Fits bikes with 700 x 23mm tires and fender eyelets - 454 grams
SKS The Bluemels Bicycle Fender Set - 26-inch Wheels
$67.99 - $71.99
IMPACT-RESISTANT CLEANERS FOR THE BIKE Fender set made of robust sandwich construction A really brilliant performance! The SKS BLUEMELS BASIC mudguard set not only integrates perfectly on the bike, but also reliably protects against dirt and splash water. Thanks to the flexible sandwich construction, in which extremely fine aluminum strips are embedded in a plastic coating, the fenders are extremely robust, rigid, and protected against corrosion. Stylish driving fun with a safety system With its glossy black surface and black fastening components, the BLUEMELS BASIC also leaves nothing to be desired in terms of looks. The ASR safety system ensures that the struts are decoupled if branches get caught between the spokes so that the wheel does not lock up. The V-struts with fixed bridges guarantee an individual adjustment, the bottom bracket cut-outs make assembly possible even in tight spaces. Includes accessories and struts. - Aluminum/plastic sandwich construction - V-struts with fixed bridges for flexible adjustment - ASR safety system - Bottom bracket cutouts - Made in Germany
SKS The Bluemels Bicycle Fender Set - 700c/650B Wheels
$62.99 - $71.99
Fender set made of robust sandwich construction A really brilliant performance! The SKS BLUEMELS BASIC mudguard set not only integrates perfectly on the bike, but also reliably protects against dirt and splash water. Thanks to the flexible sandwich construction, in which extremely fine aluminum strips are embedded in a plastic coating, the fenders are extremely robust, rigid, and protected against corrosion. Stylish driving fun with a safety system The ASR safety system ensures that the struts are decoupled if branches get caught between the spokes so that the wheel does not lock up. The V-struts with fixed bridges guarantee an individual adjustment, the bottom bracket cut-outs make assembly possible even in tight spaces. Includes accessories and struts. - Aluminum/plastic sandwich construction - V-struts with fixed bridges for flexible adjustment - ASR safety system - Bottom bracket cutouts - Made in Germany - Tire width in inches: 0.8"-1.1" - Tire width in mm: 20-28mm - Front mudguard length: 680mm - Rear mudguard length: 1185mm
PDW Origami Clip-On Rear Fender
$21.00
Just the thing for rainy weather, the Portland Design Works minimalist Origami Rear Seatpost Fender attaches to a clamp-on bracket you mount to your seatpost. And it packs down so you can easily store it when not in use. - Length: 445mm (7.5") - Weight: 160g (5.6oz)
Page 1 of 3 Next page