Other

All Wheels Manufacturing replacement derailleur hangers are produced in our Colorado shop to exacting tolerances. CNC machined 6061 aluminum Black anodized finish Attaches to frame with (1) M4X 15mm SHOULDER BOLT (M4-15SH) Included COOP USED WITH DROPOUT-429

Internal components for servicing the Reverb and Reverb Stealth mechanism.

Parts for repair and maintenance of DT Swiss hubs. - DT Swiss Shim Ring: for Star Ratchet Hubs with 26mm OD Driveside Bearings

- Compatible with KMC, Shimano 10 speed chains - DLC Coated - Reusable - No Tool Required - Card of 2 pairs

- Includes stainless bolts - Fits 160mm front and 140mm rear rotors

Transform Your Ride with Unmatched Simplicity and Performance. Are you ready to simplify your cycling setup and enhance your riding experience? Look no further than the all-new SOLO-SPLINE Single Speed Conversion Kit from Wheels Manufacturing. Designed specifically for Shimano Micro Spline compatible hubs, this innovative kit is your gateway to a streamlined, high-performance single-speed system. Following the success of our Solo-XD kit, the SOLO-SPLINE continues our tradition of excellence and innovation. It offers an easy and affordable way to convert your existing Shimano wheels into a robust single-speed setup. Ideal for commuters, racers, and trail enthusiasts, the SOLO-SPLINE delivers the reliability and straightforward performance that single-speed riders love. Why Choose the SOLO-SPLINE? The SOLO-SPLINE features a unique design that incorporates a base sleeve and lockring which smoothly fits onto the Shimano Micro Spline compatible freehub body. This mirrors the hassle-free installation of a standard cassette, allowing for quick setup changes. Slide on the spacers and cog, and secure them with a dependable lock ring. Experience the perfect ride, tailored to your preferences and riding style. Key Features of the SOLO-SPLINE: Precision Engineering: Utilizes a durable 7075 Aluminum carrier and cogs, with lightweight 6061 Aluminum spacers. Adjustable Setup: Includes adjustable spacers to fine-tune your chainline for optimal performance. Compatibility: Designed specifically for Shimano Micro Spline compatible hub bodies. Enhanced Chain Retention: Features a cog designed with a narrow-wide tooth pattern to ensure superior chain hold. Customizable Options: Available cog sizes include 16T, 18T, and 20T, allowing you to customize your ride. Lightweight Design: At only 101g, the kit is lighter than many other options on the market, reducing rotational mass for faster acceleration and easier climbing. Included in the Kit: 1 Lock Ring (6061 Aluminum) 1 Carrier Ring (7075 Aluminum) 1 End Spacer (6061 Aluminum) 1 5mm Spacer (6061 Aluminum) 2 2mm Spacers (6061 Aluminum) 1 1mm Spacer (6061 Aluminum) 1 18T Cog (7075 Aluminum)

Big performance in a tiny package, the Shimano SW-RS801 remote shifter brings lightning fast shifting to custom shift points on the handlebar. - Compact satellite shifter creates multiple, custom shift points on the handlebar - Attaches directly to the handlebar - 100mm cable length

- Rear Derailleur GX 1X11 B Bolt and Limit Screw Kit

The SRAM Universal Derailleur Hanger (UDH) consolidates thousands of hanger options across the industry, while protecting your derailleur against chain jams by pivoting back and out of the way, and slipping slightly when encountering impacts. It improves shifting performance, guarantees better alignment, and works with all drivetrains. - The Universal Derailleur Hanger consolidates thousands of mountain bike derailleur standards - UDH is designed to rotate rearward in the event of impact, and features the ability to “re-rail” the chain back onto the small cog - It works with all commercially available MTB and E-MTB drivetrains from Shimano to Box to Sunrace

The ultimate in cockpit data integration. Personalize your ride and your data with RED AXS controls and the Hammerhead Karoo. Use Bonus Buttons to scroll your head unit or shift your derailleur from our most comfortable controls. FEATURES: - Aftermarket kit includes: Hammerhead Karoo, left and right Shift-Brake System controls, and flat mount calipers - Compatible with all generations of AXS derailleurs

REAR DERAILLEUR CARBON INNER CAGE RED XPLR AXS E1 INCLUDING ALUMINIUM SCREWS Use only SRAM parts with SRAM components. Installation of parts and accessories not originally intended could result in less than optimal performance and/or injury. For in-depth service information on SRAM products, refer to our website at www.sram.com/service. Information contained on SRAM Connect is subject to change at any time without prior notice.

Hose fittings fit many of SRAM's newest hydraulic brake models. - Includes 5 Threaded Hose Barbs, 5 Compression Fittings, 1 T8 Torx Wrench - Fittings are backwards compatible with older SRAM and Avid hydraulic brakes

MTB trigger shifter spare parts for repairs and replacement

Shimano's Di2 electric drivetrain takes shifting to the next level. Two Di2 Battery Chargers are available. Choose the model designed for your system's battery. An additional power cable is required for the external-style battery charger (sold separately). These chargers fully charge the battery in 90 minutes.

If you put in a lot of miles and/or sweat a lot, your shifter hoods probably need freshening up. Grab a pair of Shimano Di2 STI Lever Hoods to make your bike feel new again. - Fits Dura-Ace ST-9150 Di2 levers

Flat Mount Disc Caliper Bracket Bolts

REAR DERAILLEUR OUTER LINK KIT RED XPLR AXS (UPPER AND LOWER OUTER LINK WITH BUSHINGS INCLUDING BOLTS) Use only SRAM parts with SRAM components. Installation of parts and accessories not originally intended could result in less than optimal performance and/or injury. For in-depth service information on SRAM products, refer to our website at www.sram.com/service. Information contained on SRAM Connect is subject to change at any time without prior notice.

Shimano BT-R1A External Di2 Battery - All Di2 components on the bicycle require the same firmware version. Using Di2 components with different firmware versions may cause malfunctions - Use Di2 system checker to update component firmware - Di2 External Battery, battery charger, and power cable are universal between Dura-Ace 9070, 7970, Ultegra 6870, 6770 and Alfine Di2 systems - Battery weight: 71 grams

Original equipment ceramic bearing pulleys for SRAM rear derailleurs. - Chain Compatibility: SRAM XX1

- Dust-proof and waterproof rubber seal cover - Protect the power source connection on the frame when the e-bike is parked outside or you carry it without the EnergyPak

Giant Contact Ski Type Bar Extensions fit the Giant Connect SL and Contact Clip-On Bar Clamps to provide you with an aerodynamic riding position for triathlon and time trials. Featuring lightweight alloy construction. Features - 22.2mm carbon aerobar extensions - Compatible with 45203-04 Clip-on Aerobar clamp

- Includes: 2x2.5mm, 1x5mm, 1x10mm.

Giant's Connect SL U-Bend Carbon Aerobar Extension is for use with Giant's Clip-On Aerobar Clamps (sold separately). This model features the U-Bend. Thanks to carbon construction, this is a featherweight and super-stiff bar. Plus, it has 70mm of fore/aft adjustment to dial in your ideal aero position.

Replacement cartridge for Contact Switch & Contact Switch S dropper posts. - Fits: Giant Contact Switch Post- Gen 1 (2018+)

RockShox 30mm Seal Kit

The OneLoc remote provides total control over your suspension at your fingertips. The increased leverage at the bar, translate in a smoother and easier actuation. - Can be mounted above or below handlebars - Great match for SRAM 1x drivetrains - Tall clamp allows OneLoc to easily fit non-SRAM components

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - CNC machined 6061 aluminum - Black anodized finish - Made in the USA

Disc brake adaptors designed to mate Magura disc brakes with a variety of frame mounts and rotor sizes. - Includes hardware to mount adaptor to frame

Wheels Manufacturing hangers are stiffer than almost any OEM hanger, which improves durability and shifting performance. - OEM hangers are only produced by a handful of manufacturers, mostly in Taiwan and China. As a result, you will see many bikes with exactly the same hanger. Bicycle manufacturers may make mid year changes. Please use the hanger photos to select the proper hanger for your application. - These hangers DO NOT INCLUDE attachment hardware with the exception of QBP # FS1561 (DROPOUT 399) - CNC machined 6061 aluminum - Made in the USA