Parts & Accessories

$2.99
- For Race Face 30mm Cinch System cranks only
- Allows switching crank arms between bikes, such as a FatBike and an XC MTB
- Use RF-2999 for 8mm to 16mm hex wrench adapter to remove spindle

$20.00
These are 46mm inside diameter cup spacers that fit between a bottom bracket cup and the frame. Machined from 6061 aluminum and anodized black, these spacers can be used for a few different scenarios. First, when used with a Wheels Manufacturing GXP compatible bottom bracket, adding cup spacers between the non-drive side cup and the frame will move the chainrings on a GXP crank closer to the frame (reducing the chainline). Second, for Specialized road frames with the 61mm wide Carbon OSBB shell, you would place 3.5mm of spacers between each cup to effectively widen the BB shell to 68mm when used with non-Specialized cranks. One bag will properly space one 61mm wide Specialized OSBB shell to 68mm.
Specs
- Bottom Bracket/Frame Interface: Any 46mm ID BB shell: PF30, Specialized Carbon OSBB, 386EVO, 392EVO, BBRIGHT
- Inside Diameter: 46.20mm
- Outside Diameter: 52.00mm
Bag Includes:
- 2.5mm bottom bracket cup spacers (46mm ID) x 2
- 1.0mm bottom bracket cup spacers (46mm ID) x 4

$29.95
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with Specialized S-Works cranksets that have removable spiders/chainrings and are only compatible with CAMO rings and bolts. One chainline option is available for S-Works cranks. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M1 (minus 1mm - dished toward the frame): For 49mm chainline, designed for bikes with 135mm QR, 142mm thru axle, and some 148mm bikes.

$9.99
Trail riding can be tough on your gear. The ends of your Next SL G4 cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!

$40.00
Wheels Manufacturing Press Fit 30 Bottom Bracket Adapter for 22/24mm Spindle Cranks adapts 22/24mm Spindle Cranks (SRAM/TruVativ) to work on PF30 frames. Simply tap the adapters into the 6806 bearing in the BB shell, then install the spindle and cranks. Use Wheels Mfg Crank Spindle Spacers to adjust your chainline, or take up any side-to-side movement in your cranks. These spacers are machined from engineering-grade Delrin. Notes: - PF30-SRAM was originally designed for use with SRAM PF30 bottom brackets and will not work with Wheels Manufacturing PF30-BB, PF30-BB-AC or PF30-BB-CER. Use Wheels Mfg BBUNIV-SRAM to adapt 22/24mm Spindle Cranks (SRAM/TruVativ) in Wheels Manufacturing PF30 bottom brackets. - Not compatible with SRAM PF30 bottom brackets that use a thin plastic reducer inserted into the bearings. - The stock bottom bracket seals must be removed before installing the Pressfit 30 adapter

$95.99
$160.00
40% Off
This very light, stiff, and strong carbon crank spider optimizes your power transfer.
- Stiff and lightweight.
- For use with S-Works carbon road cranks.

$11.00
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly intact.

$4.50
Used to adjust crank chainline or ensure proper bearing preload when using 30mm spindle cranks. - Inner Diameter: 30mm - Outer Diameter: 41.5mm - Machined engineering-grade Delrin - Sold Individually

$4.25
Wheels Manufacturing 2.5mm Black Aluminum Bottom Bracket Spacers are for adjusting chainline or bearing play in English (BSA) or Italian threaded bottom brackets.

$9.99
Trail riding can be tough on your gear. The ends of your carbon cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips!
Compatible with:
- Race Face
- Next SL Cinch (G3)
- Sixc Cinch
- Chester
- Respond
- Next/Next SL (24mm Spindle)
- Sixc (24mm Spindle)
- Most other popular carbon MTB cranks and assorted alloy DH cranks

$10.75
Used to adjust crank chainline or take up any slack when using 29mm (SRAM DUB) spindle cranks.
- 29mm I.D.
- 1.0mm thick
- 10 spacers per bag
- Machined engineering-grade Delrin

$19.95
Wolf Tooth designed these bolts to be the best on the market. These optimized single chainring bolts have a 4mm hex socket on the bolt and a 6mm hex socket on the nut...that's right, no more spanner for your single ring bolts! These are 6mm long so they work perfectly with any bolt on single chainring that does not have threaded standoffs.
- 6mm length
- Made in the US out of 7075 Aluminum Alloy
- Has hex heads on both the bolt and nut for easy installation
- Max torque of 6-7 Nm with light grease on threads only

$9.99
Trail riding can be tough on your gear. The ends of your alloy cranks can take a lot of abuse as the trail rushes underneath you and your bike. Protect your cranks from any damage with Race Face crank boots - now made in a smaller version to fit most alloy MTB cranks. Made from a durable Race Face proprietary plastic blend, leave no doubt and go with the originator in crank end protection. Wrap it up and protect the tips.
Compatible with:
- Race Face
- Turbine Cinch
- Atlas Cinch
- Atlas (24mm Spindle)
- Turbine (24mm Spindle)
- Aeffect Cinch (175mm length ONLY)
- Most other popular alloy MTB cranks (except some alloy DH cranksets)

$39.95
- Bash guard protects chainring from logs, rocks and other trail hazards
- Designed and manufactured in the USA from 7075-T6 aluminum alloy
- See wolftoothcycling.com for mounting tips - 51g (26-30t)

$10.80
TruVativ Crank Arm Fixing Bolts
- Monocoque carbon crankset with hollow-arm design
- FSA Mega Tooth chainring design greatly improves chain retention
- FSA BB392 compatibility allows use in nearly any frame
- Bottom bracket not included

$8.99
- 7075-T6 aluminum direct mount spider or lockring to fit Race Face Cinch system splined cranks
- RF-3296 spider is required for running 2-ring setups with Boost (Race Face 1x Direct Mount rings work fine with Boost)
- Mounts using a common Park BBT-22 tool

$50.00
The Wheels Manufacturing BB30 Bottom Bracket Adapter for Campagnolo Ultra- Torque Cranks adapts Campagnolo Ultra-Torque cranks to BB30-standard frames. This adapter fits over the installed crank bearing so no bearing removal is required for installation. This adapter is machined from engineering-grade Delrin. - 48g/pr * The design of these adapters includes the use of the Campy bearings factory installed on the crank spindle.

$16.99
- Asymmetric four arm shape for greater stiffness in the power zones of the pedal stroke
- Compatible with 9/10/11 speed chains, mounts using a common Park BBT-22 tool

$29.95
Wolf Tooth's CAMO stands for Chainline and Material Optimization. Available in various chainlines and spider configurations, CAMO spiders allow the use of previously unavailable chainring styles, materials, and chainlines in a lightweight, modular, and customizable package. These spiders are for use with Cannondale cranksets that have removable spiders/chainrings and are only compatible with CAMO rings and bolts. Three different chainline options are available. The number and letter refer to the mm offset and direction from the mounting face to the centerline of the teeth: - M4 (minus 4mm - dished toward the frame): For Cannondale bikes with the Ai (asymmetric integration) offset rear triangle AND all Cannondale 27.5 Plus bikes - M9 (minus 9mm - dished toward the frame): For standard (non-Ai offset) bikes - M1 (minus 1mm - dished toward the frame): For the Fat CAAD only

$50.00
Wheels Manufacturing BBRIGHT BB30A and PF30A Adaptor for 24mm Spindle Cranks adapts 24mm spindle cranks (Shimano, FSA, etc.) to most BBRight frames. Compatible with 2011-2012 Cervelo models R3, R3 Team, S5, S5 Team, S5 VWD, R5ca and R5 VWD. - Also adapts Cannondale BB30a and PF30a frames to 24mm spindle cranks (Shimano, FSA, etc.). - Includes eight 0.7mm shims for fine-tuning chain line - Machined engineering-grade Delrin - 48g/pr

$24.99
Fits 19mm team & talon cranks:
- Splines: 48
- Diameter 19mm
- Length: 5.5" (140mm)
- Spindle bolts: 3/8" X24tpi (not included)
- Also fits: Cult OS, Demolition Revolt, Rant 48-S, WTP Royal, Redline Device and other 19mm 48 spline cranks

$10.30
Use these Wheels Manufacturing Crank Spindle Spacers to adjust chainline or bearing play in bottom brackets. - 24mm for Shimano Hollowtech II, FSA, Race Face EXI, SRAM GPX - 30mm for BB30, PF30, BB86, BB92 and other cranks with 30mm spindles - Machined engineering-grade Delrin - 10 spacers per bag

$50.00
The Wheels Manufacturing 386 EVO Adaptor for Shimano Hollowtech II Cranks adapts Shimano cranks to 386EVO-standard frames. Simply tap the adapters into the 6806 bearing in the BB shell or cups, then install the cranks using the included spacers to adjust chainline, or to take up any side-to-side movement in the crank. - Machined engineering-grade Delrin - 48g/pr Includes - (2) - 24mm ID adapters - (8 )- .7mm spacers

$11.00
SRAM’s cranks are strong and tough, ready for any kind of ride. So it’s inevitable that pedal strikes and debris will chip away at the end of the crank. SRAM’s Carbon Crank Boot is an upgrade that combats the wear and tear that comes with hard riding. The boot protects the crank from surface damage and keeps the rider’s style perfectly in tact.
- Injection molded plastic crank arm protection
- Perfect way to protect your carbon crank investment from scratches and dents from pedal strikes
- Material: Injection molded plastic
- Recommended Group: XX1, X01, XX, X0
Page 1 of 2
Next page