Maximize your visibility with this amazing taillight. The SuperFlash aims 2 extreme LEDs plus a half-watt Blaze LED for light that can be seen for up to 1 mile! The ultra-compact case is weatherproof, light and durable. And, the SuperFlash includes a bike mount and clip mount for multiple mounting options. Plus, the 2 AAA batteries (included) offer run times up to 100 hours.
Portland Design Works' Danger Zone Taillight will enhance your visibility like the beacon on a jetfighter with two 1/2-watt LEDs. It boasts three modes and includes seatpost, seatstay,. and backpack mounts, too. - ?Two 0.5 watt red LEDs by Nichia Brand - Three modes: zZz, a-HA!, and Rock Steady - Up to 50 hours run time on 2xAAA batteries (included) - Includes Stayputnik seatpost mount - Weatherproof exterior for all season riding - Weight: 57g (2oz)
Replacement LED assembly for the Centro LED helmet.
Serious road riders put in serious miles. Most of those miles occur in the daytime, when bright ambient conditions mean you need huge lumens numbers to be seen by motorists. But there's no reason a super-bright taillight can't look the part on the fastest road bikes. You invest in the best road bike technology--you deserve an equally fast taillight. Packing a huge punch with 250 lumens, the Flux 250R taillight is visible at more than 1 mile (1.5 km) in the brightest daytime conditions. Here in Morgan Hill, California we get those conditions all the time, this is the taillight we made for ourselves, and for you. - Designed to fit round and D-shaped seatposts. - Disco Flash mode: 250 lumens for 8:00 hours - Eco Flash mode: 25 lumens for 60:00 hours - Hybrid spherical lens and Fresnel lens over three high-power LEDs to send lumens for mile, or kilometers. - IPX7 waterproof means this light will be there when you need it, even in the hardest rain. - Includes 3 different size EPDM o-rings to fit a wide variety of seatposts. 2 o-rings included per size for spares. - Massive 1000mAh battery recharges via included micro USB cable in 2:15 hours. - Overmolded bezel for excellent side visibility. - Power Flash mode: 250 lumens for 8:00 hours - Steady High mode: 100 lumens for 3:00 hours - Steady Low mode: 25 lumens for 12:00 hours - Three CREE XBD 901 LEDs for maximum brightness and efficiency.
CatEye's Omni 5 Taillight uses Omni Directional Technology for 360 degrees of visibility. Five super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 120 hours. Plus, CatEye's tool-free mount makes installation a breeze.
Be seen with CatEye's Omni 3 Taillight, which uses Omni Directional Technology for 360 degrees of visibility. Three super-bright LEDs light up in three different modes so you can customize the pattern and get run times up to 200 hours. Plus, CatEye's tool-free mount makes installation a breeze.
German StVZO optimized lens with wide light spread. Two high-output LEDs provide 11 lumens. IPX7 water resistant rating. Composite matrix fender mounting system. E-bike compatible (6v input, 0.6w / 12v input 1.2w) easily plugs into batteries from top makers including Bosch, Shimano and Yamaha. Stainless Allen key hardware and 130cm long power cable included. Our e-bike lights are powered by the motor of an e-bike and need to be manually installed. Proper installation may require some disassembly of the bike and motor (depending on make and model battery type) and additional wiring to connect the light to the motor. Please contact the e-bike or motor manufacturer for installation instructions. It is highly recommended to have a trained e-bike professional install your lights for you. - Two high-output LEDs provide 11 lumens - StVZO optimized lens with wide light spread - E-bike compatible 6 – 12V input, 1.25W - Composite matrix fender-mounting system - IPX7 water resistant - Stainless Allen key hardware included - 130 cm power cable included
The most innovative bike taillight ever designed, Vya Pro blends ultra-powerful output with revolutionary smart features. The piercing 100 lumen beam is easily visible over an impressive distance of 2km, even in bright daylight. The Pro version builds on Vya’s innovations with a horizontal layout with custom engineered optic providing a concentrated burst of red light ideal for road riding in fast moving traffic. What separates Vya from traditional taillights are smart auto-on/off sensors – start riding and the light turns on automatically and will shut itself off after the ride, with a delay built in for stoplights. The scientifically designed SafePulse beam pattern not only gets noticed from motorists, but allows the driver to accurately judge distance from the rider and their direction of travel – a safety feature not possible with strobing lights. Attaching Vya is effortless with a simple clockwise 1/4 turn into the mount locking the light in place and activating the auto-on feature. An optional seat rail mount is a great addition to the platform to get safety lighting even higher on the bike to be more in a driver’s line of sight. When it comes time to recharge, remove Vya from the mount in seconds and insert the integrated USB paddle directly into a computer or USB power outlet – no cables keeps recharging simple and convenient. The next evolution in bike safety, Vya Pro is unmatched in the market for its power, compact design, and commuter convenience. Features - 100 Lumen Output certified to the FL-1 Standard with high powered premium CREE LED - Smart sensor technology senses motion and automatically turns Vya on when inserted into mount and will remain on, even when a rider pauses at stoplights - Auto-off when bike is parked or light is removed from mount to prevent the dreaded ‘dead bike light’ when it comes time for the next ride - SafePulse beam pattern scientifically designed to enhance a passing driver’s ability to judge the cyclist’s distance and direction of travel without the risks associated with flashing lights - Horizontal design with custom optic gives a powerful, concentrated burst of light to be recognizable over 2KM away – perfect for road cyclists - Impressive 6 hour runtime allows Vya to be used on multiple rides before needing a recharge, low battery status is indicated by rapidly flashing sidelights - Ultra-compact mount with durable rubber strap designed to be compatible with various size seat posts and can even be attached to seat stays - USB Mount Receptor allows light to be securely mounted or removed from bike in seconds with a simple, secure 1/4 turn lock; light will not turn on when removed from mount - Direct USB charging without cables fully charges in 2 hours - Made with bio-renewable material waterproof to 1 meter (when inserted in mount) for all-conditions reliability (IP67 Rated) Specifications - Lumens: 100 (SafePulse) - Runtime: 360 min (SafePulse) - Beam Angle: 30° (flood) - Charge Time: 120 min
Portland Design Works' Red Planet Taillight will enhance your visibility after dark. It boasts five bright LEDs with three modes to notify others of your presence. And, the Red Planet includes mounts for a seatpost, seatstay, and backpack, so you can put it wherever you want. - Five red LEDs - Steady, blinking and dance modes - Stayputnik mount included - Runs on 2xAAA batteries (included) - Weatherproof exterior for all season riding - Weight: 45 g (1.6 oz)
The Rojo 100 USB rechargeable bike tail light is designed to keep you safe and visible on every ride, day and night. It’s packed with up to 100 lumens of power so you’ll be sure to be noticed on your daytime rides and commutes whether you’re on the road, bike path or turning the corner downtown. Four precision engineered lighting modes let you select the perfect optimized optical output. - 2 high output Cree XB-D LEDs provide four modes for every kind of ride (Steady, Pulse, Courtesy & Superflash Turbo settings) - See the light in action here! - Tested to FL1 standards - Run times: 5 hrs (Steady – 25 lm), 10 hrs (Pulse - 50-90 lm), 12 hrs (Courtesy - 30-90 lm) and up to 15 hrs (Superflash - Turbo - 100 lm) - Provide 270° of visibility - Designed for when you ride the most…during the daytime. The Rojo 100 is engineered to be highly visible even in bright, sunny conditions - Water resistant – Don’t be worried to ride in the rain, the Rojo 100 is dust & water resistance rated to the IP66 standard - Fast recharging - 650 mAh lithium polymer battery charges in 2.5 hours with micro USB type C cable (included) - Multiple mounting options - Includes rear rack, seat post, seat stay and clip mount flexible mounting options - 48 grams
The Vis 180 series redefined tail lights as the safest, most reliable platform available. The Vis 180 Pro continues this tradition by offering the brightest tail light on the market with a piercing 150 lumens of output. With a wide spread of red rear lighting combined with Light & Motion exclusive amber side lights for increased visibility at intersections, the Vis 180 Pro is the essential tail light for commuters. Featuring: - 150 Lumen output certified to the FL-1 Standard - Engineered with the highest-level CREE LED and enhanced firmware - Dual LED array to maximize visibility - Ultralight Aluminum body - Accurate battery charge and status indicator with 4 status levels - Custom engineered reflectors and optical solutions optimize the light to distribute red and amber light a full 180 degrees - Secondary LED spreads amber light for 180 degrees of visibility - Simple ratchet in/out adjustability - Slide lock system allows you to easily take on / off without tools - Integrated clip for attaching to backpack or messenger bag; - Bike rack mount available and sold separately - Micro USB Rechargeable (Fully charges in 5 hours) - Low battery warning and auto shut-off to prevent damage - Multiple power settings - HiPulse: 6:00 / 150 - LoPulse: 12:00 / 75 - Solid: 4:00 / 150 - Paceline: 32:00/ 5 - Ultralight system weight: 102 grams - Designed and Assembled in California - Backed by Light & Motion’s 2 Year Warranty and Enhanced Experience Guarantee Included: - Seat Post Mount, Micro USB Charging Cable
Make sure you have excellent rear visibility at night with the Blinky 3. This sweet taillight aims 3 bright LEDs directionally to provide visibility from up to a mile away. Its soft-touch power switch accesses flashing or steady modes for up to 100 hours of run time on the 2 AAA batteries (included). And, it includes seatpost and seatstay mounts.
The water-resistant Light Kit features a clip mount to install on your Burley trailer's light loop or bracket. The 5-LEDs shine bright with 4 modes (flashing, constant, chasing & random) to provide increased visibility day or night. - 5-LEDs - 4 modes (flashing, constant, chasing & random) - Includes: (1) Red Light & (2) AAA Batteries - Compatible with Burley trailers using a Light Bracket or Light Loop
Giant's Numen Mini Lights are small, versatile, and bright. Both the headlight and taillight use super bright LEDs to make sure you're visible in low-light riding situations, and feature your choice of steady or flashing mode. The tool-free rubber mounting hardware is fast, easy to use, and fits nearly every handlebar and seatpost.
The NiteRider Sentry Aero 260 is a lightweight, aero taillight featuring dual LED light strips to deliver 260 lumens of Daylight Visible red light. An inner and outer lens design helps to shape light output, producing long-range visibility when viewed directly from the rear, but also providing ample surrounding light to the peripheral, making the Sentry Aero 260 visible from nearly any angle. - Daylight Visible Flash (DVF) - 260 lumen super bright tail light - Group Ride Mode – be seen without distracting fellow cyclists - Easy on and off Aero seat post strap mount with quick release tab - Aero seat post strap included - Convenient USB rechargeable - Super bright Daylight Visible Flash mode - Innovative Aero shape with excellent side visibility - FL1 Standard IP64, dust and water-resistant WARRANTY - The Sentry Aero 260 is backed by NiteRider's lifetime warranty that covers any defects in material and workmanship, mechanical components (housings, covers, mounts and fasteners) and LEDs. SYSTEM INCLUDES - LED Tail Light - Seat post Mount - USB Cable
The LED Laser Drive rear light enhances nighttime safety by projecting "lanes" on the road behind you. Two laser lines establish your presence by creating a lane that shows motorists where you are and where you're headed. Two solid modes and five flashing modes ensure you're always seen, and recharges are made convenient through USB. Silicone rubber mounting strap included.
Lezyne's Zecto Drive Rear is a low-profile, high-visibility light with three ultra-bright LEDs. It delivers up to 80 lumens with five output options and holds up to daily use thanks to a lightweight, durable composite matrix body with machined aluminum faceplate. Intelligent Power Indicator displays battery life and provides side visibility. Convenient Micro-USB rechargeable design. Versatile 2-in-1 Clip-On System straps to bars or clips to loops.
Portland Design Works' Fenderbot Taillight shines brightly to enhance your visibility when the sky turns dark. It boasts a 1-watt LED with three modes and precision reflector to notify others of your presence. And, the Fenderbot bolts directly to your fender so it's always on your bike. - Bright red LED and precision reflector - Bolts directly to fender to prevent theft - Weatherproof exterior for all season riding - Weight: 62 g (2.2 oz) - Runs on 2xAAA batteries (included) - Lifetime PDWarranty
Portland Design Works' Radbot 1000 Taillight shines brightly to enhance your visibility when the sky turns dark. It boasts a 1-watt LED with three modes and a precision reflector to notify others of your presence. And, the Radbot includes mounts for a rack, seatpost, seatstay, and backpack, so you can put it wherever you want. - 1.0 watt red LED made by Nichia - 3 Modes: zZz pop, Cornea Blitz and Rock Steady for up to 30 hours run time - Large precision reflector - Includes both Stayputnik quick release and Rack mounts - Weatherproof exterior for all season riding - Runs on 2xAAA batteries (included) - Weight: 62 g (2.2 oz) - Lifetime PDWarranty
Compact, aero-post-compatible safety light with two bright LEDs. It features a super-lightweight, yet durable co-molded construction that is IPX7 (waterproof) rated. NEW -- Up to 20 hours of runtime (seven hour increase) with highly improved optics. Its Wide Angle Lens offers up to 270° of visibility. The KTV Drive rear provides up to 10 lumens and five output/flash modes. And it features an integrated USB stick for convenient cable-free recharging. Specs - Max Lumens: 10 - Weight: 54g - Max Runtime: 20 hours - Recharge Time: 3 hours
Maximize your visibility with this amazing taillight. The Blinky 7 aims 7 bright LEDs directionally to provide over 220 degrees of light visible from up to a mile away! The ultra-compact case is weatherproof, light and durable. And, the Blinky 7 includes a bike mount, clip mount and arm strap. Plus, the included 2 AAA batteries offer run times of up to 100 hours.
Lock and light in one. Compact, lightweight, wearable cable lock with a 10-lumen rear light integrated into its toughened-nylon case. Features Hiplok’s CLIP + RIDE, the FLX system clips on to bag straps and jersey pockets for easy carry. As a light and lock in one, FLX is ideal for rides when you can only take the essentials.
Safety is job #1 and the Vya Series delivers premium safety with the convenience commuters love. Vya Switch is the latest addition to the Vya Family, foregoing auto on/off technology for a traditional button design. Why the new design? We had multiple requests from riders who loved the power and simple effectiveness of our Vya taillight but wanted to adjust runtime or change to a solid mode for group riding and bike path commutes. The button control also allows cyclocross and mountain bikers who hit pavement en route to the dirt the ability to turn the light on/off as needed. Oh yeah, did we mention the purists who are so accustomed to manually turning their lights on and off that not doing so creates that 'Did I forget Something' feeling? Yes control freaks – Vya Switch is for you! - 100 Lumen Output certified to the FL-1 Standard with high powered premium CREE LED - Switch control provides multiple modes for longer runtime plus a solid mode perfect for bike paths/group rides - Designed for traditionalists, Vya Switch is turned on/off by button (does not have the auto on/off feature of other Vya Lights) - SafePulse beam pattern scientifically designed to enhance a passing driver's ability to judge the cyclist's distance and direction of travel without the risks associated with flashing lights - Horizontal design with custom optic gives a powerful, concentrated burst of light to be recognizable over 2KM away – perfect for road cyclists - 100 lumen SafePulse output maintains safety for a full 6 hours; for all-day adventures switch to 50 lumen SafePulse mode for an impressive 12 hours runtime - Ultra-compact mount with durable rubber strap designed to be compatible with various size seat posts and can even be attached to seat stays - USB Mount Receptor allows light to be securely mounted or removed from bike in seconds with a simple, secure 1/4 turn lock - Direct USB charging without cables fully charges in 2 hours - Made with bio-renewable material waterproof to 1 meter (when inserted in mount) for all-conditions reliability (IP67 Rated) - Lumens: 100 (high), 50 (medium), 25 (low), 100 (SafePulse) - Runtime: 360 min (high), 720 min (medium), 240 min (low), 360 min (SafePulse) - Beam Angle: 30° (flood) - Charge Time: 120 min - Fast Charge: No - IP Rating (FL-1): 67 - Depth Rating (FL-1): 1 meter(s) - Impact Resistance (FL-1): 1 meter - Product Weight: 30 grams - Product Dimensions: 2.6" x 1.3" x 0.8" - Compatible Mounts: Seat Post
- Detects when you are braking to emit a bright light alerting others you're stopping - Max 150 lumens / 57 hour runtime in Flash mode - New 800 mAh battery. Larger battery, longer runtimes - New mounting style to fit shorter seat posts with USB plug and cable - Wide-angle optics with 270 visibility for maximum safety - Aero seat post compatible - Lightweight and durable - IPX7 water resistant co-molded design
The V stands for velocity and this tail light detects changes in riding speed and alerts surrounding traffic. - High output surface mounted LED plus 2 5mm LEDs provide steady, Courtesy & Superflash modes and V burst - Velocity Variation Technology accelerometer detects changing ride speed and alerts surrounding traffic with a four second burst of light (25 lumens) - Run times: 6 hrs (steady – 8 lm), 9 hrs (Courtesy - 3-7 lm) and up to 40 hrs (Superflash - 8 lm) - Provide 180° of visibility - Water resistance rated to IPX6 standard - 270 mAh Lithium polymer battery charges in 2.5 hours with micro USB cable (included) - Smart Charging Technology™ with built in low battery indicator - Includes seat post and seat stay mounts and clip mount for multiple mounting options - Mount it to your rear rack with the Rack Bracket (#3108) - Highly visible, even in daylight - 54 grams
- Modes include High Flash, Low Steady, DayTime Pulse, NightTime Pulse, and Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 12 hours - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Side illumination ports - Multiple Mounting Options: vertical or horizontal mounting options as well as a clip for mounting to packs, bags or belts
- Detects when you are braking to emit a bright light alerting others you're stopping - Max 75 lumens / 19.5 hour runtime in Flash mode - New 400 mAh battery. Larger battery, longer runtimes - Wide angle optics with 270° visibility for maximum safety - Aero and round seatpost compatible - Lightweight and durable - IPX7 water resistant co-molded design
- Modes include High Flash, Medium Steady, Low Steady, DayTime Pulse, NightTime Pulse, Economic Flash - Fully USB rechargeable: no batteries to buy or replace - Runtime up to 11 hours 15 mins - Memory function: light turns on at the last mode it was turned off - Power saving function: 10% power or less, lights will automatically switch to lowest lumen output - Built-in battery indicators: RED = less than 25%, GREEN = fully charged - Side illumination ports
The PDW USB-rechargeable Io taillight has two super-bright LEDs for a great value, and offers a super-quick charge time of only 2.5 hours. The Io has 3 different modes, steady, flash, and pulse, and is perfect for urban riding. - 3 modes (runtime) Steady (10h) Flash (20h) Pulse (20h) - Seatstay mount included - UV-proof rubber strap bracket for easy on and off included - Includes Micro USB-recharging cord
Minimal and mighty! The USB rechargeable Asteroid tail light from Portland Design Works mounts in seconds and shines super brightly with high quality optics so you can be seen. The double-click lens prevents accidental ons and offs. Ride up to 35 hours before needing a charge. Pairs nicely with the Asteroid Headlight - also available as a light set. - 3 Modes (burn time): Flash (35 hrs), Pulse (6.5 hrs), Steady (4.5 hrs) - Weatherproof exterior for all season riding - Micro USB recharging cord included - Weight: 76 g (2.7 oz)
Page 1 of 2 Next page